이 모듈에 대한 설명문서는 모듈:Convert/text/설명문서에서 만들 수 있습니다
-- 한국어 위키백과(ko.wikipedia.org)의 모듈:Convert에서 사용되는 텍스트
-- This is a separate module to simplify translation for use on another wiki.
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.
local translation_table = {
omit_scale_sep = true,
perunit_before_val = 2,
currency_per_word = '당',
per_word = '매',
plural_suffix = '',
specials = {
utype = {
-- ["로컬 언어 유닛 종류"] = "이_스크립트에_사용된_이름"
["연비"] = "type_fuel_efficiency",
["길이"] = "type_length",
["온도"] = "type_temperature",
["부피"] = "type_volume",
["fuel efficiency"] = "type_fuel_efficiency",
["length"] = "type_length",
["temperature"] = "type_temperature",
["volume"] = "type_volume",
},
ucode = {
exception = {
-- ["로컬 언어 유닛 코드"] = "모듈_convert에_사용된_이름"
["ft"] = "integer_more_precision",
["in"] = "subunit_more_precision",
["lb"] = "integer_more_precision",
},
istemperature = {
-- Common temperature scales (not keVT or MK).
-- ["unit code in local language"] = 1
["C"] = true,
["F"] = true,
["K"] = true,
["R"] = true,
},
usesymbol = {
-- Use unit symbol not name if abbr not specified.
-- ["unit code in local language"] = 1
["C"] = 1,
["F"] = 1,
["K"] = 1,
["R"] = 1,
["C-change"] = 1,
["F-change"] = 1,
["K-change"] = 1,
},
alttype = {
-- Unit has an alternate type that is a valid conversion.
-- ["unit code in local language"] = "alternate type in local language"
["Nm"] = "energy",
["ftlb"] = "torque",
["ftlb-f"] = "torque",
["ftlbf"] = "torque",
["inlb"] = "torque",
["inlb-f"] = "torque",
["inlbf"] = "torque",
["inoz-f"] = "torque",
["inozf"] = "torque",
},
},
},
mtext = {
section_names = {
-- name_used_in_this_script = 'Section title used in conversion data'
overrides = '재정의할 단위 코드 (Overrides)',
conversions = '환산표 (Conversions)',
outmultiples = '복합 출력 단위 (Output multiples)',
combinations = '단위 조합 (Combinations)',
inmultiples = '복합 입력 단위 (Input multiples)',
defaults = '기본 변환 단위 (Defaults)',
links = '링크 (Links)',
perunits = 'Automatic per units',
varnames = '변수명 (Variable names)',
},
titles = {
-- name_used_in_this_script = 'Title of page'
conversion_data = '모듈:Convert/설명문서/환산 데이터',
},
messages = {
-- name_used_in_this_script = 'Error message ($1 = first parameter, $2 = second)'
m_als_bad = '"$1" 별칭에 잘못된 문자열이 있습니다.',
m_als_dup = '"$1" 별칭은 이미 정의되어 있습니다.',
m_als_link = 'Alias "$1" must include a wikilink ("[[...]]") in the symlink text.',
m_als_mul = 'Alias "$1" has multiplier "$2" which is not a number.',
m_als_same = '"$2" 별칭 코드에 같이 기재된 "$1"의 내용이 본래 단위와 동일합니다. "$2"의 내용에서 해당 기재사항을 제거해주세요.',
m_als_type = 'Target of alias "$1" has wrong type.',
m_als_undef = '"=$1" 별칭을 쓰려면 본래 단위가 별칭보다 앞서 정의되었어야 합니다. 본래 단위가 정의된 이후에 해당 별칭을 정의해주세요.',
m_cmb_miss = 'Missing unit code for a combination.',
m_cmb_none = 'No units specified for combination "$1"',
m_cmb_one = 'Only one unit specified for combination "$1"',
m_cmb_type = 'Unit "$1" in combination "$2" has wrong type.',
m_cmb_undef = 'Unit "$1" in combination "$2" not defined.',
m_cmp_def = 'Composite "$1" must specify a default unit code.',
m_cmp_int = 'Composite "$1" has components where scale ratios are not integers.',
m_cmp_inval = 'Composite "$1" has a component with an invalid scale, "$2".',
m_cmp_many = 'Composite "$1" has too many fields.',
m_cmp_miss = 'Missing unit code for a composite.',
m_cmp_order = 'Composite "$1" has components in wrong order or with invalid scales.',
m_cmp_scale = 'Alternate unit "$1" in composite "$2" has wrong scale.',
m_cmp_two = 'Composite "$1" must specify exactly two unit codes.',
m_cmp_type = 'Unit "$1" in composite "$2" has wrong type.',
m_cmp_undef = 'Unit "$1" in composite "$2" not defined.',
m_def_cond = 'Invalid condition in default "$1" for unit "$2".',
m_def_fmt = 'Default output "$1" for unit "$2" should have 2 or 3 "!".',
m_def_rpt = 'Default output "$1" for unit "$2" is repeated.',
m_def_same = 'Default output for unit "$1" is the same unit.',
m_def_type = 'Default output "$1" for unit "$2" has wrong type.',
m_def_undef = '"$2"의 기본 변환 단위로 기재된 "$1" 단위 코드를 환산표에서 찾을 수 없었습니다. "$1" 단위가 제대로 정의된 것인지, 단위 코드를 오타낸 것이 아닌지 확인해주세요.',
m_dfs_code = 'Defaults section: no unit code specified.',
m_dfs_dup = 'Defaults section: unit "$1" has already been specified.',
m_dfs_none = 'Defaults section: unit "$1" has no default specified.',
m_dfs_sym = 'Defaults section: unit "$1" must have a symbol.',
m_dfs_two = 'Defaults section: unit "$1" should have two fields only.',
m_dfs_undef = 'Defaults section: unit "$1" is not defined.',
m_dup_code = 'Unit code "$1" has already been defined.',
m_error = '오류:',
m_ftl_read = '"[[$1]]" 문서에서 위키문법을 읽지 못했습니다. 해당 문서가 정말로 존재하는지, 존재한다면 문서명에 오타가 있는지 확인하세요.',
m_ftl_table = '[[$1]] should export table "$2".',
m_ftl_type = 'Fatal error: unknown data type for "$1"',
m_hdg_lev2 = '"$1" 단락의 시작 부분에 위치해야 할 2단계 제목(== $1 ==)을 찾을 수 없었습니다. 문서에 옆의 제목을 넣어주세요.',
m_hdg_lev3 = '$1 앞에 3단계 제목(===)이 없습니다.',
m_line_num = ' ($1번째 줄).',
m_lnk_brack = 'Link "$1" has wrong number of brackets.',
m_lnk_dup = 'Link exception "$1" is already defined.',
m_lnk_miss = 'Missing unit code for a link.',
m_lnk_none = 'No link defined for unit "$1".',
m_lnk_sym = 'Unit code "$1" for a link must have a symbol.',
m_lnk_two = 'Row for unit "$1" link should have two fields only.',
m_lnk_type = 'Link exception "$1" has wrong type.',
m_lnk_undef = 'Unit code "$1" for a link is not defined.',
m_miss_code = 'Missing unit code.',
m_miss_sym = 'Missing symbol.',
m_miss_type = 'Missing unit type.',
m_mul_int = 'Multiple "$1" has components where scale ratios are not integers.',
m_mul_miss = 'Missing unit code for a multiple.',
m_mul_none = 'No units specified for multiple "$1"',
m_mul_one = 'Only one unit specified for multiple "$1"',
m_mul_order = 'Multiple "$1" has components in wrong order or with invalid scales.',
m_mul_scale = 'Multiple "$1" has a component with an invalid scale, "$2".',
m_mul_std = 'Unit "$1" in multiple "$2" must be a standard unit.',
m_mul_type = 'Unit "$1" in multiple "$2" has wrong type.',
m_mul_undef = 'Unit "$1" in multiple "$2" not defined.',
m_no_title = 'Need title of page with unit definitions.',
m_ovr_dup = 'Override "$1" is already defined.',
m_ovr_miss = 'Missing unit code for an override.',
m_per_dup = 'Per unit "$1" already defined.',
m_per_empty = 'Unit "$1" has an empty field in the "per".',
m_per_fuel = 'Unit "$1" has invalid unit types for fuel efficiency.',
m_per_inv = 'Invalid field for a "per".',
m_per_two = 'Unit "$1" does not have exactly 2 fields in the "per".',
m_per_undef = 'Unit "$1" has undefined unit code "$2" in the "per".',
m_percent_s = 'Field "$1" must not contain "%s".',
m_pfx_bad = 'Unknown prefix: "$1".',
m_pfx_name = 'Unit with Prefix set must include Name.',
m_scl_bad = 'Scale expression is invalid: "$1".',
m_scl_miss = 'Missing scale.',
m_scl_oflow = 'Scale expression gives an invalid value: "$1".',
m_var_cnt = 'Variable names section: each row must have five fields.',
m_var_dup = 'Unit "$1" already has a variable name.',
m_var_miss = 'Missing field for a variable name.',
m_var_undef = 'Unit "$1" in variable names is not defined.',
m_warning = '경고:',
m_wrn_more = ' (이외에도 내용이 더 있지만 생략함)',
m_wrn_nbsp = 'Line $1 contains a nonbreaking space.',
m_wrn_nodef = 'Units with the following unit codes have no default output.',
m_wrn_ucode = ' $1',
},
},
}
-- 몇몇 단위들은 킬로그램의 "kg"처럼 단위 코드를 사용하기 전에 SI 접두사가 붙습니다.
local SIprefixes = {
-- The prefix field is what the prefix should be, if different from the prefix used.
['Y'] = { exponent = 24, name = '요타', },
['Z'] = { exponent = 21, name = '제타', },
['E'] = { exponent = 18, name = '엑사' , },
['P'] = { exponent = 15, name = '페타' , },
['T'] = { exponent = 12, name = '테라' , },
['G'] = { exponent = 9, name = '기가' , },
['M'] = { exponent = 6, name = '메가' , },
['k'] = { exponent = 3, name = '킬로' , },
['h'] = { exponent = 2, name = '헥토', },
['da']= { exponent = 1, name = '데카', },
['d'] = { exponent = -1, name = '데시' , },
['c'] = { exponent = -2, name = '센티', },
['m'] = { exponent = -3, name = '밀리', },
['μ'] = { exponent = -6, name = '마이크로', prefix = 'µ' }, -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC
['µ'] = { exponent = -6, name = '마이크로', }, -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5
['u'] = { exponent = -6, name = '마이크로', prefix = 'µ' }, -- not an SI prefix, but allow for people typing this
['n'] = { exponent = -9, name = '나노' , },
['p'] = { exponent =-12, name = '피코' , },
['f'] = { exponent =-15, name = '펨토', },
['a'] = { exponent =-18, name = '아토' , },
['z'] = { exponent =-21, name = '젭토', },
['y'] = { exponent =-24, name = '욕토', },
}
-- Some units can be qualified with one of the following prefixes, when linked.
local customary_units = { -- !! LOCALIZED !!
{ "미국", link = "미국 단위계" }, -- 1
{ "US", link = "미국 단위계" }, -- 2
{ "U.S.", link = "미국 단위계" }, -- 3
{ "영국", link = "야드파운드법" }, -- 4
{ "imp", link = "야드파운드법" }, -- 5
}
-- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km").
-- key = { "name", link = "article title", exponent = numeric_key_value }
-- If lk=on and link is defined, the name of the number will appear as a link.
local eng_scales = {
["3"] = { "천", exponent = 3 },
["4"] = { "만", exponent = 4 },
["6"] = { "백만", exponent = 6 },
["8"] = { "억", exponent = 8 },
["9"] = { "십억", link = "1000000000", exponent = 9 },
["12"] = { "조", link = "1000000000000", exponent = 12 },
["15"] = { "천조", link = "1000000000000000", exponent = 15 },
["16"] = { "경", link = "10000000000000000", exponent = 16 },
["20"] = { "해", link = "100000000000000000000", exponent = 20 },
["24"] = { "자", link = "1000000000000000000000000", exponent = 24 },
}
-- One of the following categories is included in the text of each message.
local all_categories = {
unit = "[[분류:단위 변환 시 올바르지 않은 단위를 사용한 문서]]",
option = "[[분류:단위 변환 시 올바르지 않은 옵션을 사용한 문서]]",
}
-- For some error messages, the following puts the wanted style around
-- each unit code marked like '...%{ft%}...'.
local unitcode_regex = '%%([{}])'
local unitcode_replace = { ['{'] = '"', ['}'] = '"' } -- no longer need the more elaborate substitute used before 2013-09-28
-- All messages that may be displayed if a problem occurs.
local all_messages = {
-- Message format string, %s parameters: anchor, title, text, category.
-- Each displayed message starts with "Convert:" so can easily locate by searching article.
cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[틀:단위 변환/메시지#%s|<span title="단위 변환: %s">단위 변환: %s</span>]]</i>]</sup>%s',
cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[틀:단위 변환/메시지#%s|<span title="단위 변환: %s">%s</span>]]</sup>%s',
-- Each of following messages is a table:
-- { [1] = 'title', -- mouseover title text
-- [2] = 'text', -- link text displayed in article
-- [3] = 'category key', -- key to lookup category in all_categories
-- [4] = 'anchor', -- anchor for link to relevant section on help page
-- regex = gsub_regex,
-- replace = gsub_table,
-- } Mouseover title text Link text CatKey Anchor
cvt_bad_num = { '"%s" 값은 반드시 숫자여야 합니다' , '올바르지 않은 숫자' , 'option', '올바르지_않은_숫자' },
cvt_big_prec = { 'Precision "%s" is too large' , 'precision too large' , 'option', 'precision_too_large' },
cvt_invalid_num = { '숫자가 너무 커서 한계 범위를 넘어갔습니다' , '한계범위를 넘은 숫자', 'option', '한계범위를_넘은_숫자' },
cvt_no_num = { 'Needs the number to be converted' , 'needs a number' , 'option', 'needs_number' },
cvt_no_num2 = { 'Needs another number for a range' , 'needs another number', 'option', 'needs_another_number' },
cvt_bad_frac = { 'frac "%s" must be an integer above 1' , 'invalid fraction' , 'option', 'invalid_fraction' },
cvt_bad_prec = { 'Precision "%s" must be an integer' , 'invalid precision' , 'option', 'invalid_precision' },
cvt_bad_sigfig = { 'sigfig "%s" must be a positive integer' , 'invalid sigfig' , 'option', 'invalid_sigfig' },
cvt_empty_option = { '비어있던 "%s" 옵션이 있어 무시했습니다' , '빈 옵션' , 'option', '빈_옵션' },
cvt_deprecated = { '"%s" 옵션은 폐지될 예정입니다.' , '*' , 'option', '폐지될_옵션', format = 'cvt_format2' },
cvt_no_spell = { 'Spelling is not available' ,'버그네요, 제보해주세요','option', '도움_요청하기' },
cvt_unknown_option = { '올바르지 않은 "%s" 옵션이 있어 무시했습니다', '올바르지 않은 옵션' , 'option', '올바르지_않은_옵션' },
cvt_bad_default = { '"%s" 단위가 올바르지 않은 기본 변환 단위를 가지고 있습니다', '버그네요, 제보해주세요', 'unit', '도움_요청하기'},
cvt_bad_unit = { 'Unit "%s" is invalid here' , 'unit invalid here' , 'unit' , 'unit_invalid_here' },
cvt_no_default = { '"%s" 단위에 기본 변환 단위가 없습니다' ,'버그네요, 제보해주세요','unit' , '도움_요청하기' },
cvt_no_unit = { 'Needs name of unit' , 'needs unit name' , 'unit' , 'needs_unit_name' },
cvt_unknown = { '"%s" 단위는 모르는 단위입니다' , '모르는 단위' , 'unit' , '모르는_단위' },
cvt_should_be = { '%s' , '모호한 단위' , 'unit' , '모호한_단위', regex = unitcode_regex, replace = unitcode_replace },
cvt_mismatch = { '"%s" 종류의 단위를 "%s" 종류의 단위로 바꿀 수 없습니다', '변환할 수 없는 단위 종류로 변환 시도', 'unit', '변환할_수_없는_단위_종류로_변환_시도'},
cvt_bug_convert = { '버그: Cannot convert between specified units','버그네요, 제보해주세요','unit' , '도움_요청하기' },
cvt_lookup = { '"%s" 단위가 부정확하게 정의되었습니다' ,'버그네요, 제보해주세요','unit' , '도움_요청하기' },
}
-- Text to join input value/unit with output value/unit.
local disp_joins = {
-- [1]=출력 값 앞, [2]=출력 값 뒤, [3]=조합 단위 출력 값 사이; 기본값은"; "
-- [wantname] gives default abbr=off
["or"] = { " or " , "" , " or ", wantname = true },
["sqbr-sp"] = { " [" , "]" },
["sqbr-nbsp"] = { " [" , "]" },
["comma"] = { ", " , "" , ", " },
["콤마"] = { ", " , "" , ", " },
["쉼표"] = { ", " , "" , ", " },
["반점"] = { ", " , "" , ", " },
["slash-sp"] = { " / " , "" , wantname = true },
["slash-nbsp"] = { " / ", "" , wantname = true },
["slash-nosp"] = { "/" , "" , wantname = true },
["b"] = { " (" , ")" },
["(or)"] = { " (" , ")", " or " },
["br"] = { "<br />" , "" , wantname = true },
["br()"] = { "<br />(" , ")", wantname = true },
}
-- Text to separate values in a range.
local range_types = {
-- Specifying a table requires either:
-- * "off" and "on" values (for "abbr=off" and "abbr=on"), or
-- * "input" and "output" values (for LHS and RHS);
-- other fields are optional.
-- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens.
-- With "exception = true", that also occurs with "adj=on|abbr=on".
-- If "adj" is defined here, that text (unchanged) is used with "adj=on".
["+"] = " + ",
[","] = ", ",
[", and"] = ", and ",
[", 그리고"] = ", 그리고",
["와"] = "와 ",
["과"] = "과 ",
[", or"] = ", or ",
[", 또는"] = ", 또는 ",
["by"] = " by ",
["-"] = "–",
["~"] = " ~ ",
["to about"] = " to about",
["and"] = { off = " and ", on = " and ", exception = true },
["그리고"] = { off = " 그리고 ", on = " 그리고 ", exception = true },
["과"] = { off = "과 ", on = "과 ", exception = true },
["와"] = { off = "와 ", on = "와 ", exception = true },
["and(-)"] = { input = " and ", output = "–" },
["그리고(~)"] = { input = " 그리고 ", output = "~" },
["그리고(-)"] = { input = " 그리고 ", output = "-" },
["과(~)"] = { input = "과 ", output = " ~ " },
["과(-)"] = { input = "과 ", output = "-" },
["와(~)"] = { input = "와 ", output = " ~ " },
["와(-)"] = { input = "와 ", output = "-" },
["or"] = { off = " or " , on = " or " , exception = true },
["또는"] = { off = " 또는 ", on = " 또는 ", exception = true},
["to"] = { off = " to " , on = " to " , exception = true },
["to(-)"] = { input = " to ", output = "–" },
["+/-"] = { off = " ± ", on = " ± ", adj = " ± ", is_range_change = true },
["by(x)"] = { input = " by ", output = " × ", out_range_x = true },
["x"] = { off = " by ", on = " × ", abbr_range_x = true },
["X"] = { off = " by ", on = " × " }, -- TEMPORARY and undocumented option for experiments to compare with new abbr_range_x
["xx"] = " × ",
["*"] = "×", -- use "*" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}}
}
local range_aliases = {
-- ["alternative name for a range"] = "standard range name"
["&"] = "그리고",
["–"] = "-",
["~"] = " ~ ",
["–"] = "-",
["to-"] = "to(-)",
["×"] = "x",
["×"] = "x",
["곱"] = "x",
["±"] = "+/-",
["플마"] = "+/-",
["±"] = "+/-",
}
-- Convert accepts range text delimited with whitespace, for example, {{convert|1 to 2|ft}}.
-- In addition, the following "words" are accepted without spaces, for example, {{convert|1-2|ft}}.
-- Words must be in correct order for searching, for example, 'x' after 'xx'.
local range_words = { '-', '–', 'xx', 'x', '*' }
local ranges = {
types = range_types,
aliases = range_aliases,
words = range_words,
}
-- Valid option names.
local en_option_name = {
-- ["local text for option name"] = "en name used in this module"
["$"] = "$",
["abbr"] = "abbr",
["adj"] = "adj",
["comma"] = "comma",
["디버그"] = "debug",
["debug"] = "debug",
["disp"] = "disp",
["frac"] = "frac",
["lang"] = "lang",
["링크"] = "lk",
["lk"] = "lk",
["near"] = "near",
["order"] = "order",
["round"] = "round",
["sigfig"] = "sigfig",
["sing"] = "adj", -- "sing" is an old alias for "adj"
["sortable"] = "sortable",
["sp"] = "sp",
["spell"] = "spell",
["stylein"] = "stylein",
["styleout"] = "styleout",
}
-- Valid option values.
-- Convention: parms.opt_xxx refers to an option that is set here
-- (not intended to be set by the template which invokes this module).
-- Example: At en.wiki, "abbr" includes:
-- ["comma"] = "opt_nocomma"
-- As a result, if the template uses abbr=comma, this script sets:
-- parms["opt_nocomma"] = true
-- parms["abbr"] = nil
-- Therefore parms.abbr will be nil, or will have one of the listed values
-- that do not start with "opt_".
-- An option value of form "xxx?" is the same as "xxx" but shows the input as deprecated.
local en_option_value = {
-- $=x is handled as a special case: x should be a currency symbol that will be used instead of "$"
["abbr"] = {
-- ["local text for option value"] = "en value used in this module"
["comma"] = "opt_nocomma?", -- no numsep in input or output numbers
["def"] = "", -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation")
["h"] = "on", -- abbr=on + use "h" for hand unit (default)
["hh"] = "opt_hand_hh", -- abbr=on + use "hh" for hand unit
["in"] = "in", -- use symbol for LHS unit
["mos"] = "mos", -- in a range, repeat the input unit (no longer used)
["none"] = "off", -- old name for "off"
["off"] = "off", -- use name for all units
["on"] = "on", -- use symbol for all units
["out"] = "out", -- use symbol for RHS unit (default)
["values"] = "opt_values", -- show only input and output numbers, not units
["~"] = "opt_also_symbol", -- show input unit symbol as well as name
},
["adj"] = {
["1"] = "opt_singular", -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1)
["flip"] = "opt_flip?", -- reverse order of input/output
["j"] = "opt_use_nbsp", -- "join": use " " instead of " " between value and unit name
["mid"] = "opt_adjectival, opt_adj_mid", -- adj=on with user-specified text after input unit (between input and output)
["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers
["off"] = "", -- ignored (off is the default)
["on"] = "opt_adjectival", -- unit name is singular and hyphenated
["pre"] = "opt_one_preunit", -- user-specified text before input unit
["ri0"] = "opt_ri=0", -- round input with precision = 0
["ri1"] = "opt_ri=1", -- round input with precision = 1
["ri2"] = "opt_ri=2", -- round input with precision = 2
["ri3"] = "opt_ri=3", -- round input with precision = 3
},
["comma"] = {
["5"] = "opt_comma5", -- only use numsep grouping if 5 or more digits
["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits
["gaps3"] = "opt_gaps, opt_gaps3", -- group only in threes rather than default of no gap before a single digit after decimal mark
["gaps5"] = "opt_gaps?", -- deprecated 2015-05-29, was: opt_gaps + opt_comma5
["off"] = "opt_nocomma", -- no numsep in input or output numbers
},
["debug"] = {
["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible
},
["disp"] = {
["/"] = "or?", -- see "slash"
["2"] = "opt_output_only?", -- display only output value and symbol/name (not input)
["5"] = "opt_round=5", -- round output value to nearest 5
["b"] = "b", -- join: '(...)'
["(or)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination
["br"] = "br", -- join: '<br />'
["br()"] = "br()", -- join: '<br />(...)'
["comma"] = "comma", -- join: ','
["flip"] = "opt_flip", -- reverse order of input/output
["flip5"] = "opt_flip, opt_round=5?", -- disp=flip + disp=5
["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers
["number"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name)
["or"] = "or", -- join: 'or'
["out"] = "opt_output_only",
["output number only"] = "opt_output_number_only",
["output only"] = "opt_output_only",
["preunit"] = "opt_two_preunits", -- user-specified text before input and output units
["s"] = "or?", -- see "slash"
["slash"] = "or?", -- 2014-11-03: "disp=slash" is now equivalent to "disp=or" as slash is unhelpful
["sqbr"] = "sqbr", -- join: '[...]'
["table"] = "opt_table", -- output is suitable for a table cell with align="right"
["tablecen"] = "opt_tablecen", -- output is suitable for a table cell with align="center"
["u2"] = "opt_output_unit_only?", -- display output symbol/name (not input, and not output value)
["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value)
["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known
["unit2"] = "opt_output_unit_only",
["x"] = "x", -- join: <first>...<second> (user-specified text)
},
-- frac=x is handled as a special case: x must be an integer (possibly in local language) = 2 or more
["lang"] = { -- language for output digits (both en and local digits are always accepted for input)
["en"] = "opt_lang_en", -- use en digits for numbers, regardless of local language
["local"] = "opt_lang_local", -- use local digits for numbers (default, although config can change default to en)
},
["lk"] = {
["입력"] = "in", -- link LHS unit name or symbol
["해제"] = "off", -- 링크를 걸지 않음: same as default except for hand unit
["모두"] = "on", -- link all unit names or symbols (but not twice for the same unit)
["출력"] = "out", -- link RHS unit name or symbol
["in"] = "in", -- link LHS unit name or symbol
["off"] = "off", -- do not link: same as default except for hand unit
["on"] = "on", -- link all unit names or symbols (but not twice for the same unit)
["out"] = "out", -- link RHS unit name or symbol
},
["near"] = {
["5"] = "opt_round=5?", -- round output value to nearest 5
},
["order"] = {
["flip"] = "opt_flip", -- reverse order of input/output
},
["round"] = {
["0.5"] = "opt_round=0.5", -- round output value to nearest 0.5
["5"] = "opt_round=5", -- round output value to nearest 5
["10"] = "opt_round=10", -- round output value to nearest 10 (same as but clearer than "|-1")
["25"] = "opt_round=25", -- round output value to nearest 25
["50"] = "opt_round=50", -- round output value to nearest 50
["each"] = "opt_round_each", -- using default precision in a range, round each output separately (default uses highest precision of each item in range)
},
-- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more
["sortable"] = {
["off"] = "", -- ignored (off is the default)
["in"] = "opt_sortable_on?", -- same as "on"
["on"] = "opt_sortable_on", -- output sort key for use in a sortable table, based on value from converting to a standard base unit
["out"] = "opt_sortable_on?", -- same as "on"
},
["sp"] = {
["us"] = "opt_sp_us", -- use U.S. spelling (like "meter" instead of default "metre")
},
["spell"] = { -- only English spelling is supported; not scientific notation; only some fractions
["in"] = "opt_spell_in", -- spell input value in words
["In"] = "opt_spell_in, opt_spell_upper", -- spell input value in words with first letter uppercase
["on"] = "opt_spell_in, opt_spell_out", -- spell input and output values in words
["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase
},
-- stylein=x is handled as a special case: x can be any text
-- styleout=x is handled as a special case: x can be any text
}
return {
SIprefixes = SIprefixes,
all_categories = all_categories,
all_messages = all_messages,
currency = { ['$'] = true, ['£'] = true, ['₩'] = true, ['¥'] = true, ['원'] = true, ['엔'] = true, ['위안'] = true, ['달러'] = true, ['파운드'] = true },
currency_strings = { ['원'] = '₩', ['엔'] = '¥', ['위안'] = '¥', ['달러'] = '$', ['파운드'] = '£' }, -- for kowiki
customary_units = customary_units,
disp_joins = disp_joins,
en_option_name = en_option_name,
en_option_value = en_option_value,
eng_scales = eng_scales,
ranges = ranges,
translation_table = translation_table,
}
편집자
로그인하시면 댓글을 쓸 수 있습니다.
{{ comment.name }}
{{ comment.created | snstime }}
-
{{comment.page_title}} ―{{comment.name}}