CentOS APC 설치

(리눅스 APC 설치에서 넘어옴)
  다른 뜻에 대해서는 우분투 APC 설치 문서를 참조하십시오.
CentOS Alternative PHP Cache 설치
CentOS APC 설치

1 사전작업[ | ]

pecl install로 설치할 예정인데, 정상적으로 설치하기 위해서는 pecl, gcc, phpize, make 명령어를 사용할 수 있는 환경이 되어야 한다.

한방 설치 명령어
yum install php-pear gcc php-devel make pcre-devel
설치확인
[root@zetawiki ~]# pecl version
PEAR Version: 1.4.9
PHP Version: 5.2.10
Zend Engine Version: 2.2.0
Running on: Linux jmnote.com 2.6.18-274.3.1.el5xen #1 SMP Tue Sep 6 20:57:11 EDT 2011 x86_64
[root@zetawiki ~]# gcc
gcc: no input files
[root@zetawiki ~]# phpize
Cannot find config.m4. 
Make sure that you run '/usr/bin/phpize' in the top level syntaxhighlight directory of the module
[root@zetawiki ~]# make 
make: *** No targets specified and no makefile found.  Stop.
[root@zetawiki ~]# yum list installed php-pear gcc php-devel make pcre-devel
... (생략)
Installed Packages
gcc.x86_64                                                       4.4.7-3.el6                                                  @base
make.x86_64                                                      1:3.81-20.el6                                                @base
pcre-devel.x86_64                                                7.8-6.el6                                                    @base
php-devel.x86_64                                                 5.3.3-22.el6                                                 @base
php-pear.noarch                                                  1:1.9.4-4.el6                                                @base
→ 정상적으로 설치되어 있다면 위와 같이 나온다.

2 APC 설치[ | ]

명령어
pecl install apc
실행예시
[root@zetawiki ~]# pecl install apc
downloading APC-3.1.13.tgz ...
Starting to download APC-3.1.13.tgz (171,591 bytes)
.....................................done: 171,591 bytes
55 syntaxhighlight files, building
running: phpize
Configuring for:
PHP Api Version:         20090626
Zend Module Api No:      20090626
Zend Extension Api No:   220090626
Enable internal debugging in APC [no] :

Enter 키 입력.

Enable per request file info about files used from the APC cache [no] : 
Enable spin locks (EXPERIMENTAL) [no] : 
Enable memory protection (EXPERIMENTAL) [no] : 
Enable pthread mutexes (default) [no] : 
Enable pthread read/write locks (EXPERIMENTAL) [yes] :

모두 Enter 키 입력

... (생략)
Build process completed successfully
Installing '/usr/lib64/php/modules/apc.so'
Installing '/usr/include/php/ext/apc/apc_serializer.h'
install ok: channel://pecl.php.net/APC-3.1.13
configuration option "php_ini" is not set to php.ini location
You should add "extension=apc.so" to php.ini
→ 정상적으로 빌드되었으며, /usr/lib64/php/modules/apc.so 이 생성되었다.
php.iniextension=apc.so를 추가해야 한다고 알려준다.

3 PHP와 APC 연동[ | ]

3.1 VirtualHost 없는 경우[ | ]

[root@zetawiki ~]# php -m | grep apc
→ 연동 안됨
  • php.ini의 맨아래에 다음 내용을 추가
[apc]
extension=apc.so
[root@zetawiki ~]# php -m | grep apc
apc
→ 연동됨

3.2 VirtualHost 있는 경우[ | ]

httpd.conf에서 VirtualHost를 사용하는 경우에는 정상작동을 위해 조금 다른 설정이 필요하다.[1]

  • php.ini의 맨아래에 다음 내용을 추가
[apc]
extension=apc.so
apc.cache_by_default=0
→ 일단 apc 캐시를 사용하지 않도록 설정
  • 캐시되기 원하는 VirtualHost의 웹루트폴더의 .htaccess 파일에 다음 내용 추가
php_flag apc.cache_by_default On

4 아파치 재시작[ | ]

[root@zetawiki ~]# service httpd restart
Stopping httpd:                                            [  OK  ]
Starting httpd:                                            [  OK  ]

5 같이 보기[ | ]

6 주석[ | ]

  1. 여러 VirtualHost에 적용이 되지 않는 모양이다.
문서 댓글 ({{ doc_comments.length }})
{{ comment.name }} {{ comment.created | snstime }}