"CentOS rsyslog.conf"의 두 판 사이의 차이

 
2번째 줄: 2번째 줄:
;/etc/rsyslog.conf
;/etc/rsyslog.conf


==CentOS 7==
<syntaxhighlight lang='aconf'>
<syntaxhighlight lang='aconf'>
# rsyslog configuration file (for Red Hat-based systems)
# rsyslog configuration file
# note that most of this config file uses old-style format,
 
# because it is well-known AND quite suitable for simple cases
# like we have with the default config. For more advanced
# things, RainerScript configuration is suggested.
#
# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
# or latest version online at https://www.rsyslog.com/doc/rsyslog_conf.html
# If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html
# If you experience problems, see https://www.rsyslog.com/doc/troubleshoot.html


#### MODULES ####
#### MODULES ####


module(load="imuxsock") # provides support for local system logging (e.g. via logger command)
# The imjournal module bellow is now used as a message source instead of imuxsock.
module(load="imklog")  # provides kernel logging support (previously done by rklogd)
$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
#module(load"immark") # provides --MARK-- message capability
$ModLoad imjournal # provides access to the systemd journal
#$ModLoad imklog # reads kernel messages (the same are read from journald)
#$ModLoad immark  # provides --MARK-- message capability


# Provides UDP syslog reception
# Provides UDP syslog reception
# for parameters see https://www.rsyslog.com/doc/imudp.html
#$ModLoad imudp
#module(load="imudp") # needs to be done just once
#$UDPServerRun 514
#input(type="imudp" port="514")


# Provides TCP syslog reception
# Provides TCP syslog reception
# for parameters see https://www.rsyslog.com/doc/imtcp.html
#$ModLoad imtcp
#module(load="imtcp") # needs to be done just once
#$InputTCPServerRun 514
#input(type="imtcp" port="514")




#### GLOBAL DIRECTIVES ####
#### GLOBAL DIRECTIVES ####
# Where to place auxiliary files
$WorkDirectory /var/lib/rsyslog


# Use default timestamp format
# Use default timestamp format
41번째 줄: 40번째 줄:
# Include all config files in /etc/rsyslog.d/
# Include all config files in /etc/rsyslog.d/
$IncludeConfig /etc/rsyslog.d/*.conf
$IncludeConfig /etc/rsyslog.d/*.conf
# Turn off message reception via local log socket;
# local messages are retrieved through imjournal now.
$OmitLocalLogging on
# File to store the position in the journal
$IMJournalStateFile imjournal.state




57번째 줄: 63번째 줄:


# Log all the mail messages in one place.
# Log all the mail messages in one place.
mail.*                                                  /var/log/maillog
mail.*                                                  -/var/log/maillog




81번째 줄: 87번째 줄:
# An on-disk queue is created for this action. If the remote host is
# An on-disk queue is created for this action. If the remote host is
# down, messages are spooled to disk and sent when it is up again.
# down, messages are spooled to disk and sent when it is up again.
#$WorkDirectory /var/lib/rsyslog # where to place spool files
#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
#$ActionQueueMaxDiskSpace 1g  # 1gb space limit (use as much as possible)
#$ActionQueueMaxDiskSpace 1g  # 1gb space limit (use as much as possible)

2021년 10월 19일 (화) 15:17 기준 최신판

1 개요[ | ]

/etc/rsyslog.conf

2 CentOS 7[ | ]

# rsyslog configuration file

# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
# If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html

#### MODULES ####

# The imjournal module bellow is now used as a message source instead of imuxsock.
$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
$ModLoad imjournal # provides access to the systemd journal
#$ModLoad imklog # reads kernel messages (the same are read from journald)
#$ModLoad immark  # provides --MARK-- message capability

# Provides UDP syslog reception
#$ModLoad imudp
#$UDPServerRun 514

# Provides TCP syslog reception
#$ModLoad imtcp
#$InputTCPServerRun 514


#### GLOBAL DIRECTIVES ####

# Where to place auxiliary files
$WorkDirectory /var/lib/rsyslog

# Use default timestamp format
$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat

# File syncing capability is disabled by default. This feature is usually not required,
# not useful and an extreme performance hit
#$ActionFileEnableSync on

# Include all config files in /etc/rsyslog.d/
$IncludeConfig /etc/rsyslog.d/*.conf

# Turn off message reception via local log socket;
# local messages are retrieved through imjournal now.
$OmitLocalLogging on

# File to store the position in the journal
$IMJournalStateFile imjournal.state


#### RULES ####

# Log all kernel messages to the console.
# Logging much else clutters up the screen.
#kern.*                                                 /dev/console

# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none;cron.none                /var/log/messages

# The authpriv file has restricted access.
authpriv.*                                              /var/log/secure

# Log all the mail messages in one place.
mail.*                                                  -/var/log/maillog


# Log cron stuff
cron.*                                                  /var/log/cron

# Everybody gets emergency messages
*.emerg                                                 :omusrmsg:*

# Save news errors of level crit and higher in a special file.
uucp,news.crit                                          /var/log/spooler

# Save boot messages also to boot.log
local7.*                                                /var/log/boot.log


# ### begin forwarding rule ###
# The statement between the begin ... end define a SINGLE forwarding
# rule. They belong together, do NOT split them. If you create multiple
# forwarding rules, duplicate the whole block!
# Remote Logging (we use TCP for reliable delivery)
#
# An on-disk queue is created for this action. If the remote host is
# down, messages are spooled to disk and sent when it is up again.
#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
#$ActionQueueMaxDiskSpace 1g   # 1gb space limit (use as much as possible)
#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
#$ActionQueueType LinkedList   # run asynchronously
#$ActionResumeRetryCount -1    # infinite retries if host is down
# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
#*.* @@remote-host:514
# ### end of the forwarding rule ###

3 같이 보기[ | ]

4 참고[ | ]

문서 댓글 ({{ doc_comments.length }})
{{ comment.name }} {{ comment.created | snstime }}